Question

Windows 10: enlarge partition - that's how it works

Answer 1

Enlarge partition under Windows 10 with on-board tools
1st step:
2nd step:
3rd step:
4th step:
5th step:
Brief instructions: Enlarge partition under Windows 10 with on-board tools

---

Do you want to enlarge a partition on a hard drive on your computer? We'll show you how..

In order to separate different areas on a hard drive under Windows 10, partitions can be created. But if there is suddenly insufficient space in a partition, remedial action must be taken. With Windows standard tools you can easily enlarge a partition. But watch out: You need administration rights to carry out these instructions. In addition, you can only enlarge a partition if there is still free space available on the hard disk that has not yet been assigned to a partition.

Note: The "Extend Volume" option only works with standard tools if the unallocated space is adjacent to the partition to be enlarged. If there is another occupied partition in between, you will need an external tool such as MiniTool Partition Wizard.

Enlarge partition under Windows 10 with on-board tools

Follow our step-by-step instructions or take a look at the brief instructions ..

Caution : You can only extend partitions that are not active - for example, the C: / partition used with Windows cannot be easily extended during operation.

1st step:

Right- click the Windows icon on the far left of the system tray. This will open a menu in which you " Disk Management müssen.Sollte Select" now a kind of error message come, you do not have the administrative rights . In this case you have to log in with a Windows user account that has these rights.

2nd step:

You will now be presented with a list of the partitions that exist on the computer. Use a right-click the partition from which you want to enlarge. With a click on " Extend Volume ... " the partition will be enlarged in the following. If you select " Shrink Volume ... " instead , the partition will be shrunk accordingly.

3rd step:

A new window is opening up. This is the wizard that will help you resize partitions. Just click " Next ".

4th step:

In the next window you have to set the size of the partition. Select a partition by left-clicking it and then clicking " Add " in the middle . Normally, however, your selected partition should already be on the right-hand side. Below, under " Storage space in MB ", you can set the size. Customize them, then click Next .

5th step:

You will now be shown the settings again, which will be adjusted below. Clicking on " Finish " starts the process of changing the partition size. This may take a moment. Once the process is complete, you have successfully resized your partition.

Brief instructions: Enlarge partition under Windows 10 with on-board tools

1. Right- click the Windows icon in the system tray. Now select " Disk Management ".
2. Now select the partition that you want to enlarge. Right click on it and choose Extend Volume . If you choose Shrink Volume instead , you can reduce the size of the partition.
3. In the new window you have to click on " Next ".
4. Now select which data carrier should be assigned a new size. You can specify the size under " Storage space in MB " at the bottom. If everything is set to your satisfaction, click on " Next " again.
5. Now click on " Finish ". This process may take a moment. After that, you have successfully enlarged your partition.

---