Ask a Question

Test hard drive speed - this is how it works

+5 votes
191 views
in hardware by (242k points)
reopened
Test hard drive speed - this is how it works

1 Answer

+3 votes
by (1.6m points)
 
Best answer

How to test the speed of your hard drive
1st step:
2nd step:
3rd step:
4th step:
5th step:
quick start Guide

Want to find out the speed of your hard drive but don't know how? We explain it to you here..

image image

Want to know how fast your hard drive really is? While there are many free programs available for this purpose, you do not need them. With PowerShell in Windows 10, you can determine the speed of your hard drive in next to no time, without having to install any additional software. Just read through our instructions.

How to test the speed of your hard drive

Follow our step-by-step instructions or take a look at the brief instructions .

1st step:

image
Start PowerShell by right-clicking the Windows icon in the lower left corner and selecting " Windows PowerShell (Administrator) ".

2nd step:

image
In order to determine the read speed of your hard disk, enter the command winsat disk -seq -read -drive x and press [Enter] . For the letter x, insert the respective letter of the drive under which your hard disk is located.

3rd step:

image
Wait a moment for the exam to complete. Now look at the two values ​​in the " Disk Sequential " column . The first is the actual speed at which the hard drive reads files. An HDD should achieve a value of 250MB / s, an SSD a value of 500MB / s. If you don't know what kind of hard drive you have, read our post about it. The second value is a speed rating on a scale of 1 to 10, with 10 being very good.

4th step:

image
To find out the write speed of your hard drive, enter the command winsat disk -seq -write -drive x , where you replace the x with the letter of the drive . Then press [Enter] .

5th step:

image
Here, too, you will receive two values ​​again after the test. The same applies here as in step 3.

quick start Guide

  1. Make a right click on the Windows icon at the bottom left and then click " Windows PowerShell (Administrator) ".
  2. Enter winsat disk -seq -read -drive x and press [Enter] to find out the read speed. The x replace with each letter of the drive at which the drive is located.
  3. You will see two values in the " Disk Sequential " column . The first represents the actual speed of your hard drive. HDDs should achieve a value of 250MB / s, SSDs a value of 500MB / s. The second value is a speed rating on a scale from 1 (very bad) to 10 (very good).
  4. To determine the write speed, enter winsat disk -seq -write -drive x and press [Enter] . Again, replace the x with the letter of the drive .
  5. You will again receive the two values ​​for which the same applies as in step 3.
...